Shengli SL-5088PCM
comprehensive detection and assessment system for the outer anti-corrosive
coating conditions of buried pipelines is designed by Jiangsu Shengli specially
to provide instructions and assistance for the piping industry. It’s applied to
the corrosion and protection of petroleum, natural gas, urban gas and
underground water pipelines. However, due to the absence of early detection and
diagnosis before pipe network overhaul, it was impossible to duly find the
hidden danger in the pipes which were not perforated but whose anti-corrosive
and insulating coating was damaged, which was a cause for the repeated perforating
after repair of buried pipelines. The aging, friability, peeling, and falling
of pipeline protective coating will lead to corrosion and perforation, and then
to leakage, causing immeasurable losses.
Shengli SL-5088PCM
can test the buried pipelines without excavation in order to determine and
assess the damage conditions of the outer anti-corrosive coating, and can
conduct precise location and depth investigation of the pipes, which was
unattainable under non-excavation cases before. That detection technology not
only works as a test and acceptance means for newly built pipes, but also can
regularly monitor the operating pipes. To test the conditions of the protective
coating of buried pipelines and to replace and repair them as required,
extending the life time of pipes, can save lots of maintenance and
reconstruction costs. It’s crucial to ensure the proper operation of pipelines.
Technical features
of Shengli SL-5088PCM
• Automatically generating the distribution diagram of damage
locations on pipeline outer anti-corrosive coating
• Automatically generating the status diagram of damage
locations on pipeline outer anti-corrosive coating
• Automatically generating the variation diagram of buried depth
of pipelines
• Automatically generating the graph of current attenuation of
pipelines
• Advanced function of current direction can locate the damage
points on anti-corrosive coating within centimeters
• Precise location integrated with PCM (pipeline current
mapping)
• A-type bracket which has low earthing requirements can be
applied to dry sand regions and concrete pavements.
• Adoption of world’s first-class artificial neural network
identification technology can quickly determine position and size of damage
points on the anti-corrosive coating, and it’s an exclusive technology in the
world (notes: the detection speed is superior to that of foreign counterparts)
• The transmitter sends a special encoding detection signal
current to the pipes in order to make the instrument more interference-resistant.
• The high-energy density lithium battery is used, which has
large capacity, less weight, and is environmental-friendly, meanwhile reduces
the monobloc weight.
• Large-power transmitter, one-time connection, testing distance
reaches up to 30km.
• The transmitter uses a special technology, compared with
foreign ones, only half the weight at the same power.
• Easy operation by only one person
• The receiver can measure and display current without
connection to pipes.
• The use of artificial neural network identification technology
reduces false indication, thus to minimize unnecessary excavation.
• Locating and depth investigation of pipe routes, and
assessment of damage conditions of anti-corrosive coating
• Regular tracking and detection of key pipes
• Construction quality acceptance of anti-corrosive coatings of
newly laid pipes
• Checking of branch oil pipes on the main pipe
• Assessment of pipe cathode anti-corrosive effects
Technical
parameters of Shengli SL-5088PCM receiver
Working
frequencies: 100HZ, 128HZ+4+8HZ, 512HZ+4+8HZ, 1KHZ+4+8HZ, 128HZ, 512HZ, 1KHZ, and
2KHZ (notes: all these frequencies can identify the direction and size of
damage points, while only one superposed waveform identifies the direction of
damage points in foreign countries)
Location accuracy:
2% of the depth (no interference from adjacent pipelines)
Current accuracy:
2% of actual current (no interference from adjacent pipelines)
Depth accuracy: 2%
of depth (no interference from adjacent pipelines)
Measurement range:
8 meters
Current mapping:
able to measure various signal currents and the direction of the damaged
anti-corrosive coating accurately
Sensitivity: 10mA
at a buried depth of one meter
Damage location: 8
frequencies locate the position and direction of the damage points on the
anti-corrosive coating, with the accuracy within 2 centimeters (notes: only a
superposed waveform signal of 4HZ and 8HZ detects the position and direction of
the damage points on the anti-corrosive coating)
Data records:
position, size, buried depth, and current of damage points
Data download: the
recorded data can be downloaded to PC
Battery: lithium
can last for 20 hours (notes: optional)
Quality
certification: ISO9001
Shell material:
ABS
Overall dimension:
58x28x12cm
Weight: 1.8kg
Technical
parameters of Shengli SL-5088PCM detector
◆Receive frequency: LF
◆Gain control: Automatic gain, range: 0-140dB
◆Location accuracy: ≤5cm
◆Depth range: ≤15m
◆Power supply: 7.4V lithium battery pack
◆Working time: ≥20hours
◆Weight: 2.6kg
◆Quality certification: IS09001：2008
Technical
parameters of Shengli SL-5088PCM transmitter
Working
frequencies: 128+4+8HZ, 512+4+8HZ, 1K+4+8HZ, 128HZ, 512HZ, 1KHZ, and 2KHZ
Output currents: 100mA,
300mA, 600mA, 1A, 2A, and 3A.
Output voltage: up
to 120V
Output power: up
to 200w
AC power supply:
50Hz, AC220V
DC power supply:
24V 35AH high-capacity Lithium (notes: optional, only 8kg, lasting for 8
hours), which adopts the high-energy density lithium battery and features
high-capacity, less weight, environmental-friendliness, etc., reducing the
monobloc weight.
Working
temperature: -25℃- +60℃
Shell material:
ABS
Overall dimension:
46x34x16cm
Weight: 8.8kg
(notes: only half the weight of foreign counterparts)
Quality
certification: IS09001:2000
Shengli SL-5088PCM
comprehensive detection and assessment system for buried pipeline outer
anti-corrosive coating- working principle: the instrument consists of
transmitter and receiver. The transmitter is an independent 0.1A-3A device outputting
detection signals, while the handheld receiver is used for tracing of piping
routes, precise location of damage points and current measurement. The current
intensity on the pipes attenuates as the distance increases. With the same pipe
diameter, pipe material, and soil environment, the better the insulation
between anti-corrosive coating and earth is, the less the current loss and the
attenuation are. Otherwise, in case of the anti-corrosive coating damage, e.g.
aging, falling, etc., the worse the insulation is, the larger the current loss
and the attenuation are.
Shengli SL-5088PCM
adopts the first-class neural network identification technology in the world to
quickly determine the size and direction of the damage points on the
anti-corrosive coating, solving the problems encountered by foreign
counterparts which are slow in detection and have high requirements for
earthing, consequently becoming one of the advanced detection instruments in
the world. That system is the patented product of Jiangsu Shengli Detector Co.,
Ltd., China.
